Analysis of stepwise charging limits and its implementation for efficiency improvement in switched capacitor DC–DC converters

In this work we analysed the stepwise charging technique to find the limits from which it is beneficial in terms of load capacitance and charge–discharge frequency. We included in the analysis practical limitations such as the consumption of auxiliary logic needed to implement the technique and the minimum size of auxiliary switches imposed by the technology. We proposed an ultra-low-power logic block to push these limits and to obtain benefits from this technique in small capacitances. Finally, we proposed to use a stepwise driver in the driving of the gate capacitance of power switches in switched-capacitor (SC) DC–DC converters. We designed and manufactured, in a 130 nm process, a SC DC–DC converter and measured a 29% energy reduction in the gate-drive losses of the converter. This accounts for an improvement of 4% (from 69 to 73%) in the overall converter efficiency.

     

Increasing the photocatalytic and fungicide activities of Ag3PO4 microcrystals under visible-light irradiation

The present study reports for the first time the performance of silver phosphate (Ag₃PO₄) microcrystals as photocatalyst (degradation of Rodamine B-RhB) and antifungal agent (against Candida albicans–C. albicans) under visible-light irradiation (455 nm). Ag₃PO₄ microcrystals were synthesized by a simple co-precipitation (CP) method at room temperature. The structural and electronic properties of the as-synthetized Ag₃PO₄ have been investigated before and after 4 cycles of RhB degradation under visible light using X-ray diffraction (XRD), micro-Raman spectroscopy, UV–Vis spectrophotometer and field emission scanning electron microscopy (FE-SEM) images. The antifungal activity was analyzed in planktonic cells and 48h-biofilm of C. albicans by colony forming units (CFU) counting, confocal laser and FE-SE microscopies. Statistical analysis was carried out using SPSS software. Morphological and structural modifications of Ag₃PO₄ were observed upon recycling. After 4 recycles, the material maintained its photodegradation property; an eightfold increase in the efficiency of Ag₃PO₄ was observed in planktonic cells and a two fold increase in biofilm when irradiated under visible light. Thus, higher antifungal effectiveness against C. albicans was obtained when associated with visible-light irradiation.     

Nucleation and crystallization of Ba2Si3O8 spherulites in a barium aluminum silicate glass,and mechanical properties of the obtained glass-ceramics

The effect of spherulitic crystallization on the elastic moduli and fracture toughness of a barium aluminum silicate glass was investigated. The crystallization process results in Ba₂Si₃O₈ phase and is initiated from Ba rich nuclei. Nucleation is optimal in the 690-720 °C interval. Young’s modulus is increased by 12.5% when the glass-ceramic conversion is nearly complete. Nevertheless, as the size and the volume fraction of crystals are increased, some microcracking shows up upon cooling from the crystallization temperature. An optimal improvement of the fracture toughness (SEPB method) by 27 % is observed for a 49 % volume fraction of 5 to 10 μm large spherulites.     

Mechanochemical synthesis of ternary chalcogenide chalcostibite CuSbS2 and its characterization

Journal of Materials Science: Materials in Electronics - In this work, the very rapid one-step mechanochemical synthesis of nanocrystalline ternary chalcogenide chalcostibite CuSbS2 prepared from...     

Manganese oxides treated with organic compounds as catalysts for water oxidation reaction

Manganese oxides of different crystalline structures: α-MnO₂, δ-MnO₂, α,γ-MnO₂ and Mn₂O₃; were treated with the organic compounds picolinic acid, ethylenediamine and pyridine; and were applied as catalysts in the chemical water oxidation reaction using Ce(IV) ammonium nitrate as sacrificial oxidant. The treatment led to modifications in the oxides properties, such as reduction of the particle size, increase of surface area and partial reduction of Mn⁴⁺ to Mn³⁺ for the Mn(IV) oxides, or of Mn³⁺ to Mn²⁺ for Mn₂O₃, because of favored interactions of the organic molecules with the lattice planes with higher d spacing. Oxygen evolution reaction (OER) tests showed the superior catalytic activity of the treated Mn(IV) oxides, for instance α,γ-MnO₂-en presented TOF five times higher than pure α,γ-MnO₂. The increase in surface area as well as the higher Mn³⁺ content caused by the treatment of the Mn(IV) oxides were correlated with the improvement in the OER catalytic activity.     

Influence of microwave heating and time on functional,pasting and thermal properties of cassava starch

The effect microwaving power and time on the functional, pasting and thermal properties of cassava starch was investigated. Cassava starch at a moisture content of 30% was microwaved at 600 and 700 W for 0, 5, 15, 30 and 60 s following a preliminary study. Microwaving power and time did not alter the crystalline pattern of the starch, but there were obvious changes in the starch morphology. Starch colour was significantly (P ≤ 0.05) altered by microwave heating, with the total colour difference increasing from 4.85 to 43.01. Microwave treatment increased starch gelatinisation temperatures but decreased the swelling power, water absorption capacity and the relative crystallinity. These changes were influenced by microwave heating power and time. The results further revealed that the peak viscosity (3714.00–1947.00 cP) and setback ratio (1.70–1.49) decreased with increasing microwave heating time. However, breakdown viscosity (322.67–897.63 cP) and pasting temperature (1947.00–3714.00 °C) increased.     

Energy Recovery in Pressurized Hydraulic Networks

Water Resources Management - This paper aims to evaluate the possibility of using non-utilized hydraulic energy in urban water distribution systems. For this purpose, the viability and possible...